HM2-PWRMGMT-MIB DEFINITIONS ::= BEGIN

--
-- *************************************************************
-- Hirschmann Power Management MIB
-- *************************************************************
--

IMPORTS
    MODULE-IDENTITY, NOTIFICATION-TYPE,
    OBJECT-TYPE, 
    Integer32					FROM SNMPv2-SMI -- RFC 2578
	SnmpAdminString             FROM SNMP-FRAMEWORK-MIB
    hm2ConfigurationMibs        FROM HM2-TC-MIB;

hm2PowerMgmtMib MODULE-IDENTITY
	LAST-UPDATED "201103160000Z" -- March 16, 2011
    ORGANIZATION "Hirschmann Automation and Control GmbH"
    CONTACT-INFO
        "Postal:     Stuttgarter Str. 45-51
                     72654 Neckartenzlingen
                     Germany
         Phone:      +49 7127 140
         E-mail:     hac.support@belden.com"
    DESCRIPTION
        "Hirschmann Power Management MIB.
         Copyright (C) 2011. All Rights Reserved."
    REVISION     "201103160000Z" -- March 16, 2011
    DESCRIPTION
         "Initial version."
    ::= { hm2ConfigurationMibs 11 }

--
-- *************************************************************
-- hm2PowerMgmtMib
-- *************************************************************
--
hm2PowerMgmtMibNotifications	OBJECT IDENTIFIER ::= { hm2PowerMgmtMib 0 }
hm2PowerMgmtMibObjects			OBJECT IDENTIFIER ::= { hm2PowerMgmtMib 1 }
-- hm2PowerMgmtMibConformance			OBJECT IDENTIFIER ::= { hm2PowerMgmtMib 2 }

--
-- *************************************************************
-- hm2PowerMgmtMib groups
-- *************************************************************
--
hm2PowerSupplyGroup OBJECT IDENTIFIER ::= { hm2PowerMgmtMibObjects 1 }


--
-- chassis / Power Supply Table  --
--

hm2PSTable	OBJECT-TYPE
			 SYNTAX 		SEQUENCE OF Hm2PSEntry
			 MAX-ACCESS 	not-accessible
			 STATUS 		current
			 DESCRIPTION
				 "This table contains all variables related to the power supply
				 units of the chassis/switch. For each power supply slot exists
				 one instance."
			 ::= { hm2PowerSupplyGroup 1 }

hm2PSEntry	OBJECT-TYPE
			 SYNTAX 		Hm2PSEntry
			 MAX-ACCESS 	not-accessible
			 STATUS 		current
			 DESCRIPTION   	"The entry of the hm2PSTable."
			 INDEX			{ hm2PSID }
			 ::= { hm2PSTable 1}

Hm2PSEntry ::= SEQUENCE {
			 hm2PSID 		Integer32,
			 hm2PSState		INTEGER	 
			 }

hm2PSID	 OBJECT-TYPE
			 SYNTAX 		Integer32 (1..8)
			 MAX-ACCESS    	read-only
			 STATUS 		current
			 DESCRIPTION
				 "This index is used to identify the associated power supply
				 unit."
			 ::= { hm2PSEntry 1 }

hm2PSState	OBJECT-TYPE
			 SYNTAX 		INTEGER {
							present (1),
							defective (2),
							notInstalled (3),
							unknown (4)
							}
			 MAX-ACCESS 	read-only
			 STATUS 		current
			 DESCRIPTION
				 "Indicates the operational state of the associated power
				 supply. If the value of this variable changes, a hm2PowerSupply
				 trap is sent."
			 ::= { hm2PSEntry 2 }

--
-- hm2PSUSlotInfoTable
--			
hm2PSUSlotInfoTable	OBJECT-TYPE
			 SYNTAX 		SEQUENCE OF Hm2PSUSlotInfoEntry
			 MAX-ACCESS 	not-accessible
			 STATUS 		current
			 DESCRIPTION
				 "This table contains all EEPROM variables related to the power supply
				 slot modules of the chassis/switch. For each power supply slot module exists
				 one instance."
			 ::= { hm2PowerSupplyGroup 10 }

hm2PSUSlotInfoEntry	OBJECT-TYPE
			 SYNTAX 		Hm2PSUSlotInfoEntry
			 MAX-ACCESS 	not-accessible
			 STATUS 		current
			 DESCRIPTION   	"The entry of the hm2PSUSlotInfoTable."
			 INDEX			{ hm2PSUSlotIndex }
			 ::= { hm2PSUSlotInfoTable 1}

Hm2PSUSlotInfoEntry ::= SEQUENCE {
			 hm2PSUSlotIndex 			Integer32,
			 hm2PSUSlotChassisTypeId	INTEGER,
			 hm2PSUSlotManufacturerId	INTEGER,
			 hm2PSUSlotManufacturerDate SnmpAdminString,
			 hm2PSUSlotSerialNumber		SnmpAdminString,
			 hm2PSUSlotProductCode		SnmpAdminString,
			 hm2PSUSlotDescription		SnmpAdminString,
			 hm2PSUSlotCombinationType  INTEGER,
			 hm2PSUSlotTemperatureRange INTEGER,
			 hm2PSUSlotRevisionId		Integer32
			 }

hm2PSUSlotIndex	 OBJECT-TYPE
			 SYNTAX 		Integer32 (1..4)
			 MAX-ACCESS    	not-accessible
			 STATUS 		current
			 DESCRIPTION
				 "This index is used to identify the associated power supply
				 slot module."
			 ::= { hm2PSUSlotInfoEntry 1 }
			 
hm2PSUSlotChassisTypeId	 OBJECT-TYPE
			 SYNTAX INTEGER {
			 				  other(0),
							  mach1020(1),
							  mach4000(2),
							  railswitch(3),
							  grs(4)
							}
			 MAX-ACCESS    	read-only
			 STATUS 		current
			 DESCRIPTION
				 "The chassis type id of the associated power supply
				 slot module."
			 ::= { hm2PSUSlotInfoEntry 2 }

hm2PSUSlotManufacturerId	 OBJECT-TYPE
			 SYNTAX 		INTEGER {
										  other(0),
										  hirschmann(1)
									   }
			 MAX-ACCESS    	read-only
			 STATUS 		current
			 DESCRIPTION
				 "The manufacturer id of the associated power supply
				 slot module."
			 ::= { hm2PSUSlotInfoEntry 3 }

hm2PSUSlotManufacturerDate	 OBJECT-TYPE
			 SYNTAX 		SnmpAdminString
			 MAX-ACCESS    	read-only
			 STATUS 		obsolete
			 DESCRIPTION
				 "The manufacturer date of the associated power supply
				 slot module.
				 *** NOTE this is set to OBSOLETE ***"
			 ::= { hm2PSUSlotInfoEntry 4 }			 
			 
hm2PSUSlotSerialNumber	 OBJECT-TYPE
			 SYNTAX 		SnmpAdminString
			 MAX-ACCESS    	read-only
			 STATUS 		current
			 DESCRIPTION
				 "The serial number of the associated power supply
				 slot module."
			 ::= { hm2PSUSlotInfoEntry 5 }
			 
hm2PSUSlotProductCode	 OBJECT-TYPE
			 SYNTAX 		SnmpAdminString
			 MAX-ACCESS    	read-only
			 STATUS 		current
			 DESCRIPTION
				 "The product code of the associated power supply
				 slot module."
			 ::= { hm2PSUSlotInfoEntry 6 }
			 
hm2PSUSlotDescription	 OBJECT-TYPE
			 SYNTAX 		SnmpAdminString
			 MAX-ACCESS    	read-only
			 STATUS 		current
			 DESCRIPTION
				 "The description of the associated power supply
				 slot module."
			 ::= { hm2PSUSlotInfoEntry 7 }
			 
hm2PSUSlotCombinationType	 OBJECT-TYPE
			 SYNTAX 		INTEGER {
									  only-on-psu1(0),
									  psu1-sys-psu2-poe(1),
									  psu1-poe-psu2-sys(2),
									  two-separate-psus(3)
								   }
			 MAX-ACCESS    	read-only
			 STATUS 		current
			 DESCRIPTION
				 "The combination type of the associated power supply
				 slot module."
			 ::= { hm2PSUSlotInfoEntry 8 }
			 
hm2PSUSlotTemperatureRange	 OBJECT-TYPE
			 SYNTAX 		INTEGER {
									  tr-0-60(0),
									  tr-minus40-60(1),
									  tr-minus40-70(2),
									  tr-minus40-70cc(3),
									  tr-minus40-85(4),
									  tr-minus40-85cc(5)
								   }
			 MAX-ACCESS    	read-only
			 STATUS 		current
			 DESCRIPTION
				 "The temperature range of the associated power supply
				 slot module."
			 ::= { hm2PSUSlotInfoEntry 9 }

hm2PSUSlotRevisionId	 	OBJECT-TYPE
		 	 SYNTAX 		Integer32 (0..255)
			 MAX-ACCESS    	read-only
			 STATUS 		current
			 DESCRIPTION
			 	 "Hardware revision of the PSU"
		 ::= { hm2PSUSlotInfoEntry 10 }			 
			 		 
--
-- hm2PSUUnitInfoTable
--			 
hm2PSUUnitInfoTable	OBJECT-TYPE
			 SYNTAX 		SEQUENCE OF Hm2PSUUnitInfoEntry
			 MAX-ACCESS 	not-accessible
			 STATUS 		current
			 DESCRIPTION
				 "This table contains all EEPROM variables related to the power supply
				 slot module units. For each power supply slot module exists
				 up to two instances."
			 ::= { hm2PowerSupplyGroup 20 }

hm2PSUUnitInfoEntry	OBJECT-TYPE
			 SYNTAX 		Hm2PSUUnitInfoEntry
			 MAX-ACCESS 	not-accessible
			 STATUS 		current
			 DESCRIPTION   	"The entry of the hm2PSUUnitInfoTable."
			 INDEX			{ hm2PSUSlotIndex, hm2PSUUnitIndex }
			 ::= { hm2PSUUnitInfoTable 1}

Hm2PSUUnitInfoEntry ::= SEQUENCE {
			 hm2PSUUnitIndex 			 Integer32,
			 hm2PSUUnitConverterType	 INTEGER,
			 hm2PSUUnitNumberOfInputs	 Integer32,
			 hm2PSUUnitOutputType        INTEGER,
			 hm2PSUUnitSystemBudget      Integer32,
			 hm2PSUUnitPoeBudget         Integer32,
			 hm2PSUUnitFanCount			 Integer32,
			 hm2PSUUnitVoltageRange      INTEGER,
			 hm2PSUUnitPowerInterruption INTEGER 
			 }

hm2PSUUnitIndex	 OBJECT-TYPE
			 SYNTAX 		Integer32 (1..2)
			 MAX-ACCESS    	not-accessible
			 STATUS 		current
			 DESCRIPTION
				 "The number of PSU units on the associated power supply
				 slot module."
			 ::= { hm2PSUUnitInfoEntry 1 }
			 
hm2PSUUnitConverterType	 OBJECT-TYPE
			 SYNTAX 		INTEGER {
									  ac(1),
									  dc(2)
								   }
			 MAX-ACCESS    	read-only
			 STATUS 		current
			 DESCRIPTION
				 "The converter type of the associated power supply
				 slot module unit."
			 ::= { hm2PSUUnitInfoEntry 2 }
			 
hm2PSUUnitNumberOfInputs	 OBJECT-TYPE
			 SYNTAX 		Integer32(0..2)
			 MAX-ACCESS    	read-only
			 STATUS 		current
			 DESCRIPTION
				 "The number of inputs of the associated power supply
				 slot module unit."
			 ::= { hm2PSUUnitInfoEntry 3 }
			 
hm2PSUUnitOutputType	 OBJECT-TYPE
			 SYNTAX 		INTEGER {
									  system(1),
									  both(2),
									  poe(3)
									}
			 MAX-ACCESS    	read-only
			 STATUS 		current
			 DESCRIPTION
				 "The output type of the associated power supply
				 slot module unit."
			 ::= { hm2PSUUnitInfoEntry 4 }
			 
hm2PSUUnitSystemBudget	 OBJECT-TYPE
			 SYNTAX 		Integer32(0..1000)
			 MAX-ACCESS    	read-only
			 STATUS 		current
			 DESCRIPTION
				 "The system budget of the associated power supply
				 slot module unit."
			 ::= { hm2PSUUnitInfoEntry 5 }
			 
hm2PSUUnitPoeBudget	 OBJECT-TYPE
			 SYNTAX 		Integer32(0..1000)
			 MAX-ACCESS    	read-only
			 STATUS 		current
			 DESCRIPTION
				 "The Poe budget of the associated power supply
				 slot module unit."
			 ::= { hm2PSUUnitInfoEntry 6 }

hm2PSUUnitFanCount	 OBJECT-TYPE
			 SYNTAX 		Integer32(0..2)
			 MAX-ACCESS    	read-only
			 STATUS 		current
			 DESCRIPTION
				 "The fan count of the associated power supply
				 slot module unit."
			 ::= { hm2PSUUnitInfoEntry 7 }
			 
hm2PSUUnitVoltageRange	 OBJECT-TYPE
			 SYNTAX 		INTEGER {
									  vr-18-60vdc(0),
									  vr-24-60vdc(1),
									  vr-24-48vdc(2),
									  vr-60-250vdc-110-240vac(3),
									  vr-48-54vdc-poe(4)
								   }
			 MAX-ACCESS    	read-only
			 STATUS 		current
			 DESCRIPTION
				 "The voltage range of the associated power supply
				 slot module unit."
			 ::= { hm2PSUUnitInfoEntry 8 }
			 
hm2PSUUnitPowerInterruption	 OBJECT-TYPE
			 SYNTAX 		INTEGER {
									  yes(1),
									  no(2)
								   }
			 MAX-ACCESS    	read-only
			 STATUS 		current
			 DESCRIPTION
				 "The power interruption value of the associated power supply
				 slot module unit."
			 ::= { hm2PSUUnitInfoEntry 9 }

-- 
-- ***********************************************************
-- hm2PowerMgmtMibMibNotifications
-- ***********************************************************
--
hm2PowerSupplyTrap	NOTIFICATION-TYPE
		OBJECTS		{ hm2PSID, hm2PSState }
		STATUS  	current
		DESCRIPTION	
			"This trap is sent when the value of hm2PSState has been changed."
		::= { hm2PowerMgmtMibNotifications 1 }
		
END